In addition to the featured projects, Merit Builders, Inc. has completed projects covering a wide array of facilities from agricultural to heavy industrial. No job is too big or too small.

Aircraft Hangars
Located in Westminster, Maryland, this 70,000-square-feet of corporate hangar space was fabricated by A & S Building Systems. There are seven individual hangars with 100' clear span frames to accommodate 80'-wide openings for hangar doors. The buildings are separated with interior liner panels and welded valley gutter at the roof lines.
[1st photo, right]
 

Institutional
This 8,000-square-foot recreation room in Falling Waters, West Virginia, was fabricated by Chief Industries and erected on a second floor mezzanine. [2nd photo, right]








Commercial
Built in Frederick, Maryland, this 20,000-square-foot office manufacturing facility was manufactured by Chief Industries.
The building features standing seam roofing and architectural wall panels with soffit and facia on one endwall.
[3rd photo, right]





Warehousing
An 80,000-square-foot office warehouse space was erected in Buckeystown, Maryland. The two-building complex was fabricated by Chief Industries. The building features standing seam roofing and the high side encompasses a facia system which wraps the endwalls to form a parapet wall condition.
[4th photo, right]





Distribution Centers
This 1,000,000-square-foot Delta Hybrid(tm) in York, Pennsylvania was manufactured by Butler Manufacturing Company. The building has MR-24® roofing and Shadowrib® wall panels above a tilt-up concrete wainscoat.
[5th photo, right]






Industrial / Manufacturing
Project 1: Located in Frederick, Maryland, this 120,000-square-foot manufacturing plant was fabricated by American Buildings Company. The two-building complex encompasses several overhead crane systems in each building, as well as a suspended conveyor support frame. [6th photo, right]
 

Industrial / Manufacturing
Project 2: This 200,000-square-foot facility in San Antonio, Chile, is a Butler Manufacturing Company wide span building featuring clear span frames with BR-II roof and wall panels. [7th photo, right]








Shopping Malls
In Santiago, Chile, a 500,000-square-foot Butler Manufacturing Company Widespan(tm) project consists of multiple buildings connected with a clear-story walkway and features MR-24® roofing and StylWall® II Texture-Cote (tm) wall panels.
[8th photo, right]